The set also includes a pilot pin for 7/16" to 1/2" cutter diameters, a pilot pin for 9/16" to 1-1/16" cutter diameters, and a case. High-speed steel hss is a general-purpose steel that offers toughness and shock resistance, and is compatible with a variety of materials. Because of their multiple cutting edges, step drilling, burr-free holes without the need for pilot holes, minimizing the need for secondary operations such as pre-drilling, annular cutters can produce accurate, or reaming.
Jancy engineering manufactures Slugger portable magnetic drills and annular cutters, as well as metal working equipment for fabrication. Each cutter has a 3/4" shank to accommodate the 3/4" arbor of a magnetic drill or to connect to a drill press with an arbor assembly sold separately. Drill bits are cutting tools used to make holes in a range of materials.
The cutters create through holes as deep as 1" in a range of materials, with best performance in mild steel and structural steel. 3/4" shank size accommodates a 3/4" arbor. The jancy slugger uncoated, 3/4", with one each of the following cutter diameters: 7/16", 1/2", 5/8", 7/8", 9/16", 11/16", high-speed steel HSS annular cutter set includes 11 annular cutters with 1" depth and a 3/4" shank, 15/16", 13/16", 1" and 1-1/16".
DEWALT DWE1622K 2-Speed Magnetic Drill Press, 2-Inch
4-3/8 inch drill travel offers maximum capacity for heavy duty applications. A quick change chuck system allows for tool free change between 3/4" Weldon Shank and 1/2" keyed chuck, and the Quick Release feed handles provide tool free change of handles to either side of the tool. This press has overload protection electronics which prevent motor damage and excess accessory wear designed for long life.
Includes: dwe1622 drill press, safety chain, and height adjustment tool, Kit box 10 amp motor, Quick change 1/2-in keyed chuck, 2-speed settingsl ;No Load Speed : 300/450 rpm. Quick Change chuck system. Magnetic coolant bottle can be placed on either side of tool or on a work surface. 4" drill travel offers maximum capacity for heavy duty applications, along with a motor height adjustment that gives greater range of accessory compatibility.
Overload protection electronics which prevent motor damage.
HEAVY DUTY 5/8" 16mm Magnetic Drill Chuck with 3/4" Weldon Shank Adapter
Magnetic coolant bottle can be placed on either side of tool or on a work surface. 3/4" weldon shank adapter the jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank. Overload protection electronics which prevent motor damage. The drill in the picture is not included although it is for sale 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm.
Please confirm your drill is compatible with a 3/4" Weldon Shank. It comes with the key, chuck and adapter. 4-3/8 inch drill travel offers maximum capacity for heavy duty applications.
Jancy USA-101 Portable Magnetic-Base Drill, 120V, 11.5 Amp Motor, 1-1/2" Diameter x 2" Depth Capacity
1-1/2" maximum cutting diameter and 2" maximum cutting depth. 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm. Please confirm your drill is compatible with a 3/4" Weldon Shank. 4-3/8 inch drill travel offers maximum capacity for heavy duty applications. Comes with Chuck Key and adapter. Magnetic coolant bottle can be placed on either side of tool or on a work surface.
5/8" heavy duty chuck for Magnetic Drill Press. Quick Change chuck system. The jancy usa-101 portable magnetic drill is made in the USA and comes with a 1 year factory warranty. Only jancy offers integrated safety shields and "Smart magnet" circuitry that does not allow the drill motor to turn on in unsafe magnetic holding conditions.
Magnet dead lift and 650 lb. 1480 lb.
Jancy Slugger U19010 1/2" Chuck And Adapter Accessory For USA-101 Magnetic Drill
Drill point breakaway on 1" thick steel. Comes with 1/2" jacobs chuck, spindle adapter, and chuck key. Magnetic field detection, and safety strap, integrated chip guard, to help ensure safe working environments. Easily converts Jancy USA-101 to use twist drills. Comes with Chuck Key and adapter. Please confirm your drill is compatible with a 3/4" Weldon Shank.
Quick Change chuck system. Drill chuck & arbor adapter, 1/2 in capacity, for use with g1078025 magnetic drill Press, Includes Chuck Key ' 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm. Magnet dead lift and 650 lb. Magnetic coolant bottle can be placed on either side of tool or on a work surface.
1480 lb.
Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8" Diameter x 2" Depth Capacity
6 horsepower hp 1200 watt single-phase motor weighs 27 lb. 1-5/8" maximum cutting diameter and 2" maximum cutting depth. 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm. Comes with 1/2" jacobs chuck, spindle adapter, and chuck key. Magnetic coolant bottle can be placed on either side of tool or on a work surface.
Magnet dead lift and 1096 lb. 5/8" heavy duty chuck for Magnetic Drill Press. Comes with Chuck Key and adapter. Smart magnet circuitry will also shut down the drill motor in the unlikely case of the drill breaking away from the workpiece. Please confirm your drill is compatible with a 3/4" Weldon Shank. Compact dimensions, for fabricating in confined spaces.
4-3/8 inch drill travel offers maximum capacity for heavy duty applications.
Jancy Slugger 10207W 1 Quart Water Soluable Cutting Fluid
Water based cutting fluid is designed to be used with Slugger cutters to improve life of the cutter. Comes with Chuck Key and adapter. Jancy cutting fluid has been specifically designed to improve the life of Slugger annular cutters. Comes with 1/2" jacobs chuck, spindle adapter, and chuck key. 1480 lb. Compact dimensions, for fabricating in confined spaces.
Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. Easily converts Jancy USA-101 to use twist drills. Overload protection electronics which prevent motor damage. 5/8" heavy duty chuck for Magnetic Drill Press. Magnetic field detection, and safety strap, integrated chip guard, to help ensure safe working environments.
Jancy cutting fluid is a water soluble concentrate that makes up to 10 quarts of cutting fluid.
Slugger by FEIN Jancy JME Holemaker III Magnetic Base Drill, 1-3/8" Capacity, 15.75" Height, 1100W, 11.5 Amp, 450-590 RPM, Plastic and Metal
Extemely wear resistant concept with durable newly designed polyurthane motorhousing for use in industry and manual trades. Pivoting motor cable. Side-reversible feed handwheel with hexagonal hub. Magnet dead lift and 650 lb. 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm. Quick Change chuck system.
120v, 11. 5 amp magnetic-base drill press with 1. 75 horsepower hp 1380 watt single-phase motor weighs 29 lb. 1-1/2" maximum cutting diameter and 2" maximum cutting depth. Please confirm your drill is compatible with a 3/4" Weldon Shank. The slugger by fein jme holemaker III is the well-priced entry level solution for customers drilling harder materials on a budget.
Compact dimensions, for fabricating in confined spaces.
Jancy Slugger 63134111041 Annular Cutter with Pilot, 7/16" x 1", Gray
34diameter Shank. Improved magnet for easier placement and better holding power on thinner material. Integrated hexagon socket holder. Extemely lightweight drill yet powerful enough for heaviest drilling applications. Made in USA. Drill point breakaway on 1" thick steel. Effective solution for customers drilling harder materials.
Overload protection electronics which prevent motor damage. Made in Germany high powered motor. 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm. Jancy cutting fluid can improve surface finish and reduce heat build up when drilling. Please confirm your drill is compatible with a 3/4" Weldon Shank.
Cost effective drill for running with Carbide cutters which offer longer life, higher cutting rate and capable of cutting harder materials.
Sumner ST-881 Hi Fold-A-Jacks with V-Head
Magnetic field detection, and safety strap, integrated chip guard, to help ensure safe working environments. Jancy cutting fluid is a water soluble concentrate that makes up to 10 quarts of cutting fluid. Drill point breakaway on 1" thick steel. Magnetic coolant bottle can be placed on either side of tool or on a work surface.
The optimal drilling speed designed for use with carbide and hss cutters on the toughest jobs and applications. Stationary motor ensures the working height remains constant. 1480 lb. Overload protection electronics which prevent motor damage. M2 high speed steel. Quick action lock washer for fast height positioning.
Comes with Chuck Key and adapter.
Evolution Power Tools A-CC6SET-1 CYCLONE Premium 1-Inch Annular Cutter Set with Pilot Pins-For Use With Magnetic Drills, 6-Piece
The cc6set1 includes six 1-inch cutters with diameters of 9/16-inch, 5/8-inch, 13/16-Inch, 11/16-Inch, 15/16-Inch, and 1-Inch all within a specially made carrying case. Drill point breakaway on 1" thick steel. Improved magnet for easier placement and better holding power on thinner material. Magnetic coolant bottle can be placed on either side of tool or on a work surface.
Effective solution for customers drilling harder materials. Comes with Chuck Key and adapter. Fold-a-jack stand has a sturdy 1-Inch square tube base construction. Free pilot Pin Included. Magnet dead lift and 1096 lb. 5/8" heavy duty chuck for Magnetic Drill Press. Magnetic field detection, and safety strap, integrated chip guard, to help ensure safe working environments.