Incra IRSET12 12-Inch Marking Rule Set

#ad
Incra IRSET12 #ad - Rule set that lets you mark precisely where you want. Incra has re-invented the steel rule by putting micro-fine holes at every Scale Position Every 1/16-Inch And 1/32-Inch To Instantly Locate A Sharp Pencil Or Scribe Exactly On Target. Instead of squinting at that blur of lines along the edge of your old steel Rule, The Incra 12-Inch Marking Rule Set, Lets You Mark Precisely Where You Want With Zero Uncertainty And No Eye Strain.

Incra has re-invented the steel rule by putting micro-fine holes at every scale position. Instead of squinting at that blur of lines along the edge of your old steel rule. Perfectly placed horizontal lines with dead-on accuracy. Using a t-square this guide draws perfectly placed Horizontal Lines With Dead-On Accuracy, With Guide Slots That Wrap Around Any Edges.

Incra IRSET12 12-Inch Marking Rule Set #ad - . Helps you draw perfectly placed horizontal lines. Micro-fine holes at every scale position. Guide slots wrap around any edges. Using a t-square this guide draws perfectly placed horizontal lines with dead-on accuracy, with guide slots that wrap around any edges.

#ad



Incra PROTRAC06 6-Inch Precision Marking Protractor

#ad
Incra PROTRAC06 #ad - Protractor lets you plot any angle with ease and absolute accuracy. A metal t-bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. The incra 6-inch precision Marking Protractor lets you plot any angle with ease and absolute accuracy. It's easy on the eyes, incredibly accurate, and just plain fun to use.

Remove the t-bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. Four angle scales, including one for marking narrow stock. 6-inch centering scale with micro-fine marking holes at every 1/32 inches. Micro-fine guide holes at every 45-, 1-, 22.

Incra PROTRAC06 6-Inch Precision Marking Protractor #ad - 5-, 5-, 30-, and 0.5-degree intervals. Four angle scales, including one for marking narrow stock, suit every need. T-bar and see-through crosshairs provide perfect alignment. This marking protractor has micro-fine guide holes at every 45-, 30-, 22. 5-, 5-, 1-, and 0.5-degree intervals.

#ad



INCRA CENTER12 Centering Rule 12-Inch

#ad
Incra CENTER12 #ad - Has a built-in protractor, too. Protractor lets you plot any angle with ease and absolute accuracy. Find the exact center of any workpiece up to 12" wide. Micro-fine guide holes at every 45-, 1-, 22. 5-, 30-, 5-, and 0.5-degree intervals. 12" centering rule with protractor feature and precision marking holes at every 1/32".

Micro-fine marking holes and slots place your mark exactly on target. T-bar and see-through crosshairs provide perfect alignment. Four angle scales, including one for marking narrow stock. 6-inch centering scale with micro-fine marking holes at every 1/32 inches. Mark the center of your work piece quickly and accurately.

#ad



INCRA TINYT03 Precision Tiny T-Rule 3-Inch

#ad
Incra TINYT03 #ad - It is like a combination square that's always set to every measurement and far more accurate. 6-inch centering scale with micro-fine marking holes at every 1/32 inches. T-bar follows the edge of your work piece to mark perfectly placed horizontal or vertical lines. Use the 64ths for ultra-high resolutionT-bar is adjustable for making precise vertical measurements.

T-bar and see-through crosshairs provide perfect alignment. Incra's patented marking holes at every 1/16th,  32nd, and 64th from 0 to 3 inches. The tiny-t is has t-square capability, 64ths running horizontally across the rule and 28ths vertically. Protractor lets you plot any angle with ease and absolute accuracy.

INCRA TINYT03 Precision Tiny T-Rule 3-Inch #ad - 3" by 4. 5" size fits in your shop apron pocket. Micro-fine marking holes and slots place your mark exactly on target. Precision t-square capabilities for marking at right angels to the edge of your work. Any incra rules can be used for marking on metal. When accuracy counts - INCRA RULES. Mark the center of your work piece quickly and accurately.

#ad



INCRA I-BOX Jig for Box Joints

#ad
Incra IBOX #ad - Micro-fine marking holes and slots place your mark exactly on target. It's capable of making good fitting box joints using any width cutter within that range into lumber from 1/4-Inch to 1-Inch thick. 6-inch centering scale with micro-fine marking holes at every 1/32 inches. At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery.

Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1/8-Inch - 3/4-Inch range of pin widths. Micro-fine guide holes at every 45-, 1-, 22. 5-, 30-, 5-, and 0.5-degree intervals. 12" centering rule with protractor feature and precision marking holes at every 1/32". Reversible design works on either side of the cutter.

INCRA I-BOX Jig for Box Joints #ad - Incra's patented marking holes at every 1/16th,  32nd, and 64th from 0 to 3 inches. Exclusive incra glidelock miter bar fits standard 3/4-Inch x 3/8-Inch miter slots with a 0740-inch - 0762-inch adjustment range. To get right to the point, the new inCRA I-Box is the most advanced tool ever produced for creating a stunning variety box joints & finger joints.

#ad



Wixey WR25 Mini Digital Height Gauge

#ad
Barry Wixey Development WR25 #ad - Measure bore and slot depths with the plunger attachment. Use this gauge for setting saw blade and Router Bit Heights as Well as Positioning Fences on Router Tables and Band Saws. Exclusive incra glidelock miter bar fits standard 3/4-Inch x 3/8-Inch miter slots with a 0740-inch - 0762-inch adjustment range.

Micro-fine marking holes and slots place your mark exactly on target. T-bar and see-through crosshairs provide perfect alignment. Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1/8-Inch - 3/4-Inch range of pin widths. The wixey wr25 mini digital height gauge is a Light Weight, Easy to Use Gauge for all Types of Wood Working Applications.

Wixey WR25 Mini Digital Height Gauge #ad - Micro-fine marking holes and slots place your mark exactly on target. Mark the center of your work piece quickly and accurately. Displays inches with fractions or millimeters. Incra's patented marking holes at every 1/16th,  32nd, and 64th from 0 to 3 inches. Use it on your table saw or router table to cut great looking box joints.

6-inch centering scale with micro-fine marking holes at every 1/32 inches. 3" by 4.

#ad



Incra T-RULE06 6-Inch Precision Marking T-Rule

#ad
Incra T-RULE06 #ad - Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1/8-Inch - 3/4-Inch range of pin widths. To get right to the point, the new Incra I-Box is the most advanced tool ever produced. Combination square for marking with perfect, instant accuracy. Protractor lets you plot any angle with ease and absolute accuracy.

Other features include 0- to 3-inch height markings on The End In 32Nds, And The Option Of Marking Holes Every 1/100-Inch. Locate your sharp pencil or scribe with absolute precision. At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery.

Incra T-RULE06 6-Inch Precision Marking T-Rule #ad - Use it on your table saw or router table to cut great looking box joints. Reversible design works on either side of the cutter. Incra's patented marking holes at every 1/16th,  32nd, and 64th from 0 to 3 inches. Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy.

Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. Micro-fine guide holes at every 45-, 1-, 22. 5-, 30-, 5-, and 0.5-degree intervals.

#ad



Micro Jig DVC-538K2 MATCHFIT Dovetail Clamps

#ad
MICROJIG DVC-538K2 #ad - At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery. Measure bore and slot depths with the plunger attachment. Compatible with 3/4" x 3/4" dog holes for quick hold-downs. It expands creative freedom to build extension fences, workspaces, tables, and personalized track systems.

Create clamping tracks virtually anywhere by routing dovetail grooves. Rout a dovetail and clamp like never before. Eliminate the need for expensive T-tracks and groove your own tracks. Exclusive incra glidelock miter bar fits standard 3/4-Inch x 3/8-Inch miter slots with a 0740-inch - 0762-inch adjustment range.

Micro Jig DVC-538K2 MATCHFIT Dovetail Clamps #ad - Work smarter and build taller table saw fences, straight line sleds, and 100s of new clamping jigs. Micro-fine marking holes and slots place your mark exactly on target. Reversible design works on either side of the cutter. These unique clamps will save you time and frustration in more ways than you can count.

Incra's patented marking holes at every 1/16th,  32nd, and 64th from 0 to 3 inches. 3" by 4.

#ad



GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

#ad
MICROJIG, Inc. GR-100 #ad - 100% satisfaction Guaranteed. 3-directional Force for total control of the workpiece. Displays inches with fractions or millimeters. Eliminate the need for expensive T-tracks and groove your own tracks. Protect hands and prevent kickback like never before. Grr-ripper 3d push Block a must-have for any table saw user.

Essential protectionit's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Reversible design works on either side of the cutter. Work with small stock safely. Clamp anywhere with a dovetail groove. Micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position.

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG #ad - T-bar follows the edge of your work piece to mark perfectly placed horizontal or vertical lines. Micro-fine marking holes and slots place your mark exactly on target. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents.

Precision cutting and control down to 1/4" Ripping. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip With surgical precision. Fully adjustablethe adjustable center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic.

#ad



Kreg PRS3400 Precision Router Table Set Up Bars, Set of 7

#ad
Kreg PRS3400 #ad - Featuring new soft-grip handle. Unique clamp shape slides into dovetail wood tracks and grooves for fast and easy clamping. Locate your sharp pencil or scribe with absolute precision. Unique design straddles the Router Bit or saw blade to allow for more precise height adjustment. Protect hands and prevent kickback like never before.

Displays inches with fractions or millimeters. Combination square for marking with perfect, instant accuracy. Work smarter and build taller table saw fences, straight line sleds, and 100s of new clamping jigs. At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery.

Kreg PRS3400 Precision Router Table Set Up Bars, Set of 7 #ad - Precise 1/4" thin rips. Four angle scales, including one for marking narrow stock. Reversible and reusable MDF sub fence dramatically reduces or eliminates tearout. Micro-fine guide holes at every 45-, 1-, 22. 5-, 5-, 30-, and 0.5-degree intervals. 12" centering rule with protractor feature and precision marking holes at every 1/32".

#ad



INCRA MITEREXPRESS Miter Express

#ad
Incra MITEREXPRESS #ad - Work with small stock safely on the table saw, Router table, Jointer, & Band saw. Made in usa. Work smarter and build taller table saw fences, straight line sleds, and 100s of new clamping jigs. Precision cutting and control down to 1/4" Ripping. Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy.

A true micrOJIG Innovation. Extended 3-year warranty. Protect hands and prevent kickback like never before. Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1/8-Inch - 3/4-Inch range of pin widths. Incra's patented marking holes at every 1/16th,  32nd, and 64th from 0 to 3 inches.

INCRA MITEREXPRESS Miter Express #ad - Reversible design works on either side of the cutter. Provides zero clearance for safe and accurate cutting. There are micro-fine marking holes and slots at every 1/16-, 1/32. Micro-fine marking holes and slots place your mark exactly on target. Eliminates all side play between Table Saw's Miter Slot And Any Miter Gauge.

Combination square for marking with perfect, instant accuracy. Reversible and reusable MDF sub fence dramatically reduces or eliminates tearout.

#ad