Can be applied to clean, unsealed concrete, brick and pavers with a brush, roller or sprayer. The armor sx5000 is a low-VOC, solvent based silane/siloxane based concrete driveways. Stops concrete dusting. Resists damage cause by de-icing salts and freeze/thaw cycles. Lasts up to 10 years and won't change the look of the concrete.
Provides excellent resistance to mold, mildew, and fungus. Penetrating 2" solvent Based Silane/Siloxane Water Repellent.
SX5000 Concrete Sealer Water Repellent for Concrete and Masonry
Surfaces sealed with the armor sx5000 instantly become more resistant to the damaging effects of water absorption, such as cracking, pitting, freeze thaw and ice damage, spalling, staining. Looking for a water based penetrating sealer? Instead, consider the Armor SX5000 WB. The armor sx5000 is a solvent based silane Siloxane water repellent sealer that penetrates deep into the surface where it chemically reacts to form a hydrophobic barrier within the pores.
Overly porous surfaces may require more material. Need a wet look or high gloss, consider the Armor AR350 or Armor AR500 Won't change look of driveway. Lasts for up to 10+ years, approved by the Department of Transportation as a water repellent sealer. Will reduce surface water absorption by up to 95%. Will reduce damage caused by salt and freeze thaw cycles.
Can be used on concrete, pavers, brick, masonry.
5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer
The armor ar350 penetrates deep into the surface where it chemically bonds to the pores of the concrete and pavers, non-yellowing, breathable finish that enhances dull or faded surfaces by creating a darkened wet look, creating a long lasting, and low gloss finish. If the surface was wet, allow at least 24 hours to dry.
How to apply: first, make sure that the surface is clean and free of any contaminants that could prevent proper penetration or adhesion. Two coats are recommended to achieve the maximum life and performance benefits. Won't change look of driveway. Lasts for up to 10+ years, approved by the Department of Transportation as a water repellent sealer.
Will reduce surface water absorption by up to 95%. Will reduce damage caused by salt and freeze thaw cycles. Can be used on concrete, brick, pavers, masonry.
BonWay 32-541 Gator Grip Slip Resistant Additive for 5 Gallons
Will reduce surface water absorption by up to 95%. Will reduce damage caused by salt and freeze thaw cycles. Can be used on concrete, brick, pavers, masonry. The armor ar350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish.
The armor ar350 is manufactured in the US and made from non-recycled resins. The armor ar350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer. The armor ar350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting.
The armor ar350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat. Use 3. 2 ounce per gallon.
5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Concrete Sealer and Masonry Water Repellent
Will reduce surface water absorption by up to 95%. Will reduce damage caused by salt and freeze thaw cycles. Can be used on concrete, pavers, brick, masonry. The armor ar350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish.
The armor ar350 is manufactured in the US and made from non-recycled resins. The armor ar350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer. The armor ar350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting.
The armor ar350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat. Use 3. 2 ounce per gallon.
Chapin 6-7703 24-Inch Industrial Brass Male Extension
The armor sx5000 is manufactured in the USA! We do not use recycled or imported resins in our formulas. 24-inch brass male extension wand. Not only is it dot approved, staining, but it has been used by the DOT in several states to protect roadways and bridges against deterioration caused by freeze thaw cycles, and the growth of mold and mildew.
The armor sx5000 will not change the look or color of the substrate, and it will not leave behind a visible surface film. Fits most chapin metal industrial sprayers and most lawn and garden sprayers. To determine if this part fits your specific sprayer, invisible, please call our technical Customer Service Team at 800-950-4458 or visit our website for more information Penetrating, breathable.
Won't change look of driveway. Lasts for up to 10+ years, approved by the Department of Transportation as a water repellent sealer. Will reduce surface water absorption by up to 95%. Will reduce damage caused by salt and freeze thaw cycles.
Chapin 66000 Brass Adjustable Cone Nozzle w/ Viton
The armor sx5000 is approved by the department of transportation in several states as a water repellent sealer. This compression sprayer vee-jet nozzle is constructed of brass and has a flat fan with. 56 pm. Penetrating, invisible, breathable. Fits most chapin industrial sprayers and all sprayers with a brass discharge.
It works entirely below the surface and will maintain the natural unsealed look of the substrate. The armor sx5000 is manufactured in the USA! We do not use recycled or imported resins in our formulas. 24-inch brass male extension wand. Not only is it dot approved, but it has been used by the DOT in several states to protect roadways and bridges against deterioration caused by freeze thaw cycles, staining, and the growth of mold and mildew.
The armor sx5000 will not change the look or color of the substrate, and it will not leave behind a visible surface film. Slip resistant additive. It fits sprayer nos.
Chapin 3-6001 Brass Fan Spray Sprayer Nozzle
Water based, flagstone, brick, high solids Silane Siloxane sealer that can be used on interior and exterior, pavers, breathable, vertical and horizontal concrete, and slate. The armor sx5000 is approved by the department of transportation in several states as a water repellent sealer. 2 piece brass adjustable nozzle; spray pattern will adjust from a straight stream to a funnel/cone pattern.
Slip resistant additive. Genuine Chapin replacement part. Fits most chapin industrial sprayers and all sprayers with a brass discharge. Not only is it dot approved, staining, but it has been used by the DOT in several states to protect roadways and bridges against deterioration caused by freeze thaw cycles, and the growth of mold and mildew.
The armor sx5000 will not change the look or color of the substrate, and it will not leave behind a visible surface film. Fits most chapin metal industrial sprayers and most lawn and garden sprayers. Mix ration for 5 gallons.
for Up to 5 Gallons - Armor Fine Non Slip Additive for Slip Resistant Acrylic Sealers, Epoxy Coatings, and Urethane Coatings
The armor sx5000 will not change the look or color of the substrate, and it will not leave behind a visible surface film. Add 3 oz/gallon to the top coat for a slip resistant surface for concrete driveways, warehouse floors, paver patios, garage floors, walkways, and more. Mix ration for 5 gallons. Fine non-slip additive for solvent based acrylic sealers, and water or solvent based epoxy or urethane coatings.
Penetrating, invisible, breathable. Don't forget to check out foundation armor concrete sealers and coatings, wet look and high gloss sealers, which go great with the Armor non-slip additive! We offer an extensive line of penetrating concrete sealers, and epoxy and urethane coatings. Compatible with 1941, 1749, 1480, 6300, 97600n, 1831, 21210xp, 21250xp, 97700n, 6002, 97300, 97500, 21220xp, 1449, 21230xp, 1180, 1739, 21240xp, 1280, 1253, 1380.
Sold on Amazon. 16 oz container will be enough for up to 5 gallons. Can be added to solvent based acrylic sealers, water or solvent based epoxies and urethanes.
Armor WL550 Matte Wet Look Enhancer Sealer Concrete, Brick, Pavers, Stone, and Slate
The armor sx5000 will not change the look or color of the substrate, and it will not leave behind a visible surface film. It works entirely below the surface and will maintain the natural unsealed look of the substrate. The armor sx5000 is manufactured in the USA! We do not use recycled or imported resins in our formulas.
24-inch brass male extension wand. The armor wl550 is designed for unseALED concrete, brick, aggregate, flagstone, dense pavers, and natural stone. It chemically reacts below the surface to form a water repellent barrier within the pores that will reduce staining and deterioration caused by the absorption of water and other liquids on the surface.
Mix ration for 5 gallons. Genuine Chapin replacement part. Won't change look of driveway. Lasts for up to 10+ years, approved by the Department of Transportation as a water repellent sealer.